Advisories for Cargo/Wasmtime package

Wasmtime's allocation logic for a WebAssembly table contained checked arithmetic which panicked on overflow. This overflow is possible to trigger, and thus panic, when a table with an extremely large size is allocated. This is possible with the WebAssembly memory64 proposal where tables can have sizes in the 64-bit range as opposed to the previous 32-bit range which would not overflow. The panic happens when attempting to create a very …

Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is …

Wasmtime's Winch compiler backend contains a bug where translating the table.grow operator causes the result to be incorrectly typed. For 32-bit tables this means that the result of the operator, internally in Winch, is tagged as a 64-bit value instead of a 32-bit value. This invalid internal representation of Winch's compiler state compounds into further issues depending on how the value is consumed. One example can be seen when the …

Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic …

Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on …

Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in …

On x86-64 platforms with SSE3 disabled Wasmtime's compilation of the f64x2.splat WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When signals-based-traps are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but this data is not visible to WebAssembly guests.

In version 43.0.0 of the wasmtime crate, cloning a wasmtime::Linker is unsound and can result in use-after-free bugs. This bug is not controllable by guest Wasm programs. It can only be triggered by a specific sequence of embedder API calls made by the host. The typical symptom of this use-after-free bug is a segfault. It does not enable heap corruption or data leakage. If you are using the wasmtime CLI, …

Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could …

Wasmtime's Winch compiler contains a vulnerability where the compilation of the table.fill instruction can result in a host panic. This means that a valid guest can be compiled with Winch, on any architecture, and cause the host to panic. This represents a denial-of-service vulnerability in Wasmtime due to guests being able to trigger a panic. The specific issue is that a historical refactoring, #11254, changed how compiled code referenced tables …

Wasmtime's Winch compiler contains a bug where a 64-bit table, part of the memory64 proposal of WebAssembly, incorrectly translated the table.size instruction. This bug could lead to disclosing data on the host's stack to WebAssembly guests. The host's stack can possibly contain sensitive data related to other host-originating operations which is not intended to be disclosed to guests. This bug specifically arose from a mistake where the return value of …

Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual …

Wasmtime contains a possible panic which can happen when a flags-typed component model value is lifted with the Val type. If bits are set outside of the set of flags the component model specifies that these bits should be ignored but Wasmtime will panic when this value is lifted. This panic only affects wasmtime's implementation of lifting into Val, not when using the flags! macro. This additionally only affects flags-typed …

Wasmtime's implementation of WASI host interfaces are susceptible to guest-controlled resource exhaustion on the host. Wasmtime did not appropriately place limits on resource allocations requested by the guests. This serves as a Denial of Service vector where a guest can induce a range of crashing behaviors on the host such as: Allocating arbitrarily large amounts of host memory. Causing an allocation failure on the host, which in Rust defaults to …

The affected versions of Wasmtime can panic if the host embedder drops the future returned by wasmtime::component::[Typed]Func::call_async before it resolves.

Wasmtime's implementation of the wasi:http/types.fields resource is susceptible to panics when too many fields are added to the set of headers. Wasmtime's implementation in the wasmtime-wasi-http crate is backed by a data structure which panics when it reaches excessive capacity and this condition was not handled gracefully in Wasmtime. Panicking in a WASI implementation is a Denial of Service vector for embedders and is treated as a security vulnerability in …

On x86-64 platforms with AVX Wasmtime's compilation of the f64.copysign WebAssembly instruction with Cranelift may load 8 more bytes than is necessary. When [signals-based-traps] are disabled this can result in a uncaught segfault due to loading from unmapped guard pages. With guard pages disabled it's possible for out-of-sandbox data to be loaded, but unless there is another bug in Cranelift this data is not visible to WebAssembly guests.

Wasmtime's Rust embedder API contains an unsound interaction where a WebAssembly shared linear memory could be viewed as a type which provides safe access to the host (Rust) to the contents of the linear memory. This is not sound for shared linear memories, which could be modified in parallel, and this could lead to a data race in the host. Wasmtime has a wasmtime::Memory type which represents linear memories in …

The implementation of component-model related host-to-wasm trampolines in Wasmtime contained a bug where it's possible to carefully craft a component, which when called in a specific way, would crash the host with a segfault or assert failure. This bug was introduced in the release of Wasmtime 38.0.0 and affects it subsequent patch releases of 38.0.1 and 38.0.2. No other versions of Wasmtime are affected. In Wasmtime 38 the implementation of …

A bug in Wasmtime's implementation of the WASIp1 set of import functions can lead to a WebAssembly guest inducing a panic in the host (embedder). The specific bug is triggered by calling path_open after calling fd_renumber with either: two equal argument values second argument being equal to a previously-closed file descriptor number value The corrupt state introduced in fd_renumber will lead to the subsequent opening of a file descriptor to …

Wasmtime's filesystem sandbox implementation on Windows blocks access to special device filenames such as "COM1", "COM2", "LPT0", "LPT1", and so on, however it did not block access to the special device filenames which use superscript digits, such as "COM¹", "COM²", "LPT⁰", "LPT¹", and so on. Untrusted Wasm programs that are given access to any filesystem directory could bypass the sandbox and access devices through those special device filenames with superscript …

Under certain concurrent event orderings, a wasmtime::Engine's internal type registry was susceptible to double-unregistration bugs due to a race condition, leading to panics and potentially type registry corruption. That registry corruption could, following an additional and particular sequence of concurrent events, lead to violations of WebAssembly's control-flow integrity (CFI) and type safety. Users that do not use wasmtime::Engine across multiple threads are not affected. Users that only create new modules …

Wasmtime's implementation of WebAssembly tail calls combined with stack traces can result in a runtime crash in certain WebAssembly modules. The runtime crash may be undefined behavior if Wasmtime was compiled with Rust 1.80 or prior. The runtime crash is a deterministic process abort when Wasmtime is compiled with Rust 1.81 and later. WebAssembly tail calls are a proposal which relatively recently reached stage 4 in the standardization process. Wasmtime …

The 19.0.0 release of Wasmtime contains a regression introduced during its development which can lead to a guest WebAssembly module causing a panic in the host runtime. A valid WebAssembly module, when executed at runtime, may cause this panic. The panic in question is caused when a WebAssembly module issues a table.* instruction which uses a dropped element segment with a table that also has an externref type. This causes …

There is a bug in Wasmtime's C API implementation where the definition of the wasmtime_trap_code does not match its declared signature in the wasmtime/trap.h header file. This discrepancy causes the function implementation to perform a 4-byte write into a 1-byte buffer provided by the caller. This can lead to three zero bytes being written beyond the 1-byte location provided by the caller.

Wasmtime versions from 10.0.0 to 12.0.1 contain a miscompilation of the WebAssembly i64x2.shr_s instruction on x86_64 platforms when the shift amount is a constant value that is larger than 32. Only x86_64 is affected so all other targets are not affected by this. The miscompilation results in the instruction producing an incorrect result, namely the low 32-bits of the second lane of the vector are derived from the low 32-bits …

Wasmtime's implementation of managing per-instance state, such as tables and memories, contains LLVM-level undefined behavior. This undefined behavior was found to cause runtime-level issues when compiled with LLVM 16 which causes some writes, which are critical for correctness, to be optimized away. Vulnerable versions of Wasmtime compiled with Rust 1.70, which is currently in beta, or later are known to have incorrectly compiled functions. Versions of Wasmtime compiled with the …

Wasmtime's code generation backend, Cranelift, has a bug on x86_64 platforms for the WebAssembly i8x16.select instruction which will produce the wrong results when the same operand is provided to the instruction and some of the selected indices are greater than 16. There is an off-by-one error in the calculation of the mask to the pshufb instruction which causes incorrect results to be returned if lanes are selected from the second …

Wasmtime's code generator, Cranelift, has a bug on x86_64 targets where address-mode computation mistakenly would calculate a 35-bit effective address instead of WebAssembly's defined 33-bit effective address. This bug means that, with default codegen settings, a wasm-controlled load/store operation could read/write addresses up to 35 bits away from the base of linear memory. Wasmtime's default sandbox settings provide up to 6G of protection from the base of linear memory to …

There is a bug in Wasmtime's implementation of its pooling instance allocator when the allocator is configured to give WebAssembly instances a maximum of zero pages of memory. In this configuration the virtual memory mapping for WebAssembly memories did not meet the compiler-required configuration requirements for safely executing WebAssembly modules. Wasmtime's default settings require virtual memory page faults to indicate that wasm reads/writes are out-of-bounds, but the pooling allocator's configuration …

There is a bug in Wasmtime's implementation of it's pooling instance allocator where when a linear memory is reused for another instance the initial heap snapshot of the prior instance can be visible, erroneously to the next instance. The pooling instance allocator in Wasmtime works by preallocating virtual memory for a fixed number of instances to reside in and then new instantiations pick a slot to use. Most conventional modules …

There was a bug in Wasmtime's code generator, Cranelift, for AArch64 targets where constant divisors could result in incorrect division results at runtime. The translation rules for constants did not take into account whether sign- or zero-extension should happen, which resulted in an incorrect value being placed into a register when a division was encountered. For example, a constant 32-bit unsigned divisor of 0xfffffffe would be incorrectly sign-extended to 64-bits …

There is a bug in Wasmtime's code generator, Cranelift, where functions using reference types may be incorrectly missing metadata required for runtime garbage collection (GC). This means that if a GC happens at runtime then the collector will mistakenly think some Wasm stack frames do not have live references to garbage collected values and therefore reclaim and deallocate them. The function can then subsequently continue to use the values, leading …

Wasmtime's implementation of the SIMD proposal for WebAssembly on x86_64 contained two distinct bugs in the instruction lowerings implemented in Cranelift. The aarch64 implementation of the simd proposal is not affected. The bugs were presented in the i8x16.swizzle and select WebAssembly instructions. The select instruction is only affected when the inputs are of v128 type. The correspondingly affected Cranelift instructions were swizzle and select. The swizzle instruction lowering in Cranelift …

There is a use after free vulnerability in Wasmtime when both running Wasm that uses externrefs and enabling epoch interruption in Wasmtime. If you are not explicitly enabling epoch interruption (it is disabled by default) then you are not affected. If you are explicitly disabling the Wasm reference types proposal (it is enabled by default) then you are also not affected. The use after free is caused by Cranelift failing …

There exists a bug in the pooling instance allocator in Wasmtime's runtime where a failure to instantiate an instance for a module that defines an externref global will result in an invalid drop of a VMExternRef via an uninitialized pointer. As instance slots may be reused between consecutive instantiations, the value of the uninitialized pointer may be from a previous instantiation and therefore under the control of an attacker via …

As a Rust library the wasmtime crate clearly marks which functions are safe and which are unsafe, guaranteeing that if consumers never use unsafe then it should not be possible to have memory unsafety issues in their embeddings of Wasmtime. An issue was discovered in the safe API of Linker::func_* APIs. These APIs were previously not sound when one Engine was used to create the Linker and then a different …

There was a use-after-free bug when passing externrefs from the host to guest Wasm content. To trigger the bug, you have to explicitly pass multiple externrefs from the host to a Wasm instance at the same time, either by passing multiple externrefs as arguments from host code to a Wasm function, or returning multiple externrefs to Wasm from a multi-value return function defined in the host. If you do not …

There was an invalid free and out-of-bounds read and write bug when running Wasm that uses externrefs in Wasmtime. To trigger this bug, Wasmtime needs to be running Wasm that uses externrefs, the host creates non-null externrefs, Wasmtime performs a garbage collection (GC), and there has to be a Wasm frame on the stack that is at a GC safepoint where there are no live references at this safepoint, and …